The recently launched large format modules have a direct impact on the balance of system (BOS) installation cost reductions sought after by these members of the PV system value chain.

210mm-cell PV Modules Set the Stage for Further LCOE Reduction
210mm-cell PV Modules Set the Stage for Further LCOE Reduction

William Porter, Technical Sales Engineer | Canadian Solar Inc.

The global solar industry is on the verge of getting a boost to its competitive edge, as production begins of large format, 210mm-cell modules.  Utility-scale solar projects have played a key role in the energy transition by generating some of the lowest prices of electricity to utility companies and energy offtakers.  Project developers, designers, installers and operators are in continuous pursuit of new ways to drive down the levelized cost of energy (LCOE) associated with large ground-mounted PV power plants.  The recently launched large format modules have a direct impact on the balance of system (BOS) installation cost reductions sought after by these members of the PV system value chain.

These new PV modules utilize the largest wafer format currently available (210mm) and the latest module construction technologies. When combined with Canadian Solar’s patented double-sided PERC cell technology, they achieve frontside power ratings up to 665W with efficiencies up to 21.4%.  Module technologies implemented on these new products include half-cut cells, dual glass construction for bifacial modules, multi-busbars, and hetero type ribbon (HTR) to reduce cell gaps.  The result is a high-power, high-reliability module that can be utilized to build exceptionally performing PV power plants.  Rigorous testing has been performed on Canadian Solar’s modules with results showing low hot-spot risk, industry leading LID/LeTID degradation rates and increased performance in low light conditions.

Diagram

Description automatically generated

Chart

Description automatically generated with medium confidence

Graphical user interface, application, timeline

Description automatically generated

Chart, waterfall chart

Description automatically generated

Table

Description automatically generated

In addition to high performance and reliability, the BOS costs are significantly reduced on a $/Wdc basis, due to reductions in transportation costs, BOS material quantities, and labor hours required to install the modules.  These increases in savings are driven directly by the higher power and efficiency ratings, as well as lower operating voltages associated with the larger cell and module formats.  A direct comparison between smaller module formats and the 210mm modules is shown below for a 1500Vdc tracker:

Table, calendar

Description automatically generatedGraphical user interface, diagram, application

Description automatically generated

Transportation cost reductions are achieved by the ability to package and arrange more wattage into 40’ shipping containers.  Comparing wattage per container for 450W modules vs. 660W BiHiKu7 modules results in the following:

450W module: 33 pcs x 20 pallets x 450W = 0.297 MW

BiHiKu7: 31 pcs x 17 pallets x 660W = 0.348 MW

Canadian Solar is actively working with industry partners including developers, EPCs, mounting system manufacturers, and inverter manufacturers to deploy this new era of PV modules to the industry.  Compatibility has been confirmed with mounting system manufacturers including NEXTracker, Array Technologies, ArcTech Solar, PVH and Soltec, with discussions and testing ongoing with other manufacturers.  In-depth discussions are being held with mainstream inverter manufacturers in the industry as well.  Currently, Sun Power, Huawei, Jinlong, Fimer, SMA, and other inverter manufacturers have provided solutions for high power modules and are continuously optimizing their designs.

The photovoltaic industry is moving towards a new era of high-power modules above 600W. With frontside power ratings up to 665W, Canadian Solar HiKu7 and BiHiKu7 modules have already been mass-produced and supplied to the global market and will soon be available in North America.  In addition, Canadian Solar is actively cooperating with material suppliers and downstream customers to develop and provide one-stop solutions for 600W+ modules to reduce the LCOE of solar PV power plants.

 
The content & opinions in this article are the author’s and do not necessarily represent the views of AltEnergyMag
Canadian Solar

Canadian Solar

Canadian Solar has our global headquarters and module factory in Guelph, Ontario Canada, where we were founded, as well as offices throughout the US and Canada. Our expert teams provide a full suite of solar solutions, modules, and inverters. As a single source, we simplify your access to solar with complete system solutions backed by Canadian Solar's global expertise and bankability. We are here to stay, continuing to provide long lasting, world class solar solutions for years to come.

Other Articles

Talking RE+ with Canadian Solar
Our booth is designed to be a hub of innovation and knowledge. Attendees can explore our state-of-the-art solar products and energy storage solutions, including next-gen solar modules and advanced energy storage systems.
EP Cube the First Modular Residential Battery System
With EP Cube, homeowners can work with their installer to determine the necessary capacity and purchase just the right number of modules to store power, from 9.9 kWh to 19.9 kWh, with a narrow gradient of only roughly 3.3 kWh.
Upcoming Webinar - New Residential Module: Get both High Load and an Attractive Design
In this webinar, you will learn the 8 reasons the CS6R-MS-HL is the right module for your residential customers. You will understand how its many qualities including high-load capabilities make it an easy and effective solution for your installations.
More about Canadian Solar

Comments (0)

This post does not have any comments. Be the first to leave a comment below.


Post A Comment

You must be logged in before you can post a comment. Login now.

Featured Product

Early Fire Detection System for Battery Storage & Charging

Early Fire Detection System for Battery Storage & Charging

Revolutionizing safety in battery reliant industries, our early fire detection system uses thermal cameras to spot early signs of battery thermal runaway. It triggers alarms and notifies users via text, voice, or email, ensuring rapid response to potential hazards. Proactive and reliable, our system sets a new standard in fire prevention for enhanced peace of mind in battery storage and charging environments.