EcoCAR: The NeXt Challenge is a three-year collegiate student engineering competition that focuses on vehicle integration of advanced propulsion technologies. The competition challenges 16 universities across North America to reduce the environmental impact of vehicles by minimizing the vehicle's fuel consumption, petroleum use and emissions, while maintaining its utility, safety and performance.

EcoCAR: The NeXt Challenge

Anne Norris | EcoCAR: The NeXt Challenge


Update June 15/10
The results are in - Mississippi State University Wins Top Honors in Year Two of EcoCAR Competition


Students will design and build advanced propulsion solutions that are based on categories from the California Air Resources Board (CARB) zero emissions vehicle (ZEV) regulations. Students are encouraged to explore a variety of solutions including electric, hybrid, plug-in hybrid and fuel cells. In addition, they will incorporate lightweight materials, improve aerodynamics and utilize alternative fuels such as ethanol, hydrogen and biodiesel.

Using a real-world engineering process modeled after GM’s Global Vehicle Development Process (GVDP), teams will integrate their advanced technology solutions into a vehicle donated by GM. The GVDP is the modeling simulation process currently used to develop all GM vehicles. This real-world approach gives students valuable hands-on experience in engineering practices and resource allocation. The EcoCAR competition is unique for its focus on modeling and simulation, as well as subsystem development and testing, rather than just hardware modifications.

EcoCAR: The NeXt Challenge was established by the United States Department of Energy (DOE) and General Motors (GM) and is being managed by Argonne National Laboratory. More information is available at www.ecocarchallenge.org and on the competition blog at www.green-garage.org.

Participants

The 16 university teams participating in the EcoCAR competition are:

  • Embry-Riddle Aeronautical University (Daytona Beach, FL)
  • Georgia Tech (Atlanta, GA)
  • Michigan Technological University (Houghton, MI)
  • Mississippi State University (Starkville, MS)
  • Missouri University of Science and Technology (Rolla, MO)
  • North Carolina State University (Raleigh, NC)
  • Ohio State University (Columbus, OH)
  • Pennsylvania State University (University Park, PA)
  • Rose-Hulman Institute of Technology (Terre Haute, IN)
  • Texas Tech University (Lubbock, TX)
  • University of Ontario Institute of Technology (Oshawa, Ontario, Canada)
  • University of Victoria (Victoria, British Columbia, Canada)
  • University of Waterloo (Waterloo, Ontario, Canada)
  • University of Wisconsin-Madison (Madison, WI)
  • Virginia Tech (Blacksburg, VA)
  • West Virginia University (Morgantown, WV)

Competition Details

Year One
In the first year of EcoCAR, student teams received $10,000 in seed money to begin developing their vehicle designs. Year One was an essential foundation for establishing a successful vehicle by emphasizing the use of math-based design tools—like Argonne’s Powertrain Systems Analysis Toolkit (PSAT) or similar vehicle models—and the development of software-in-the-loop (SIL) and hardware-in-the-loop (HIL) simulation techniques.

The student teams researched, compared and selected advanced technologies that met the competition and team goals, and used hardware simulation techniques to develop and test their powertrains and subsystems. Students explored a variety of solutions including, Extended Range Electric Vehicles (EREV), Full Function Electric Vehicle (FFEV), Fuel Cell Plug-in Hybrid Electric Vehicles (FC PHEV), and Plug-In Hybrid Electric Vehicles (PHEV), and each team created a unique design.  

The 16 EcoCARdesigns are as follows:

  • Extended Range Electric Vehicles (EREV) - Eight of the EcoCARteams, including Embry Riddle Aeronautical University, Mississippi State University, North Carolina State University, Ohio State University, Pennsylvania State University, University of Wisconsin, University of Victoria and Virginia Tech chose to design Extended Range Electric Vehicles, which demonstrate full performance with an electric powertrain for all electric driving and an optimized combustion engine that can extend the range of the vehicle with its on-board fuel storage. The EcoCARteams that selected an EREV as their architecture will use either B20 or E85 to extend the range of their electric vehicles. B20 is a blend of 20% biodiesel and 80% petroleum diesel and E85 is a blend of 85% ethanol and 15% gasoline.
  • Plug-In Hybrid Electric Vehicles (PHEV) - Five of the sixteen EcoCAR teams, including Georgia Tech, Michigan Tech University, Rose-Hulman Institute of Technology, Texas Tech, and West Virginia University, designed Plug-In Hybrid Electric Vehicles which are constructed with a large lithium ion battery. The battery can be recharged by plugging into the wall and the vehicle may operate without using the engine at all. Once the plug-in range of the battery is depleted the vehicle can still operate as a regular hybrid. The architectures will use either B20 or E85 to extend the range of the vehicles.
  • Full Function Electric Vehicle (FFEV) - Only one team, University of Ontario Institute of Technology (UOIT) chose to design a Full Function Electric Vehicle, which has an all-electric motor powering its drive train and has over 100 miles of range. It stores energy in batteries that can be charged using a home electrical outlet.
  • Fuel Cell Plug-in Hybrid Electric Vehicles (FC PHEV) - Two of the sixteen EcoCAR teams, including University of Waterloo and Missouri University of Science and Technology, designed a Fuel Cell Plug-in Hybrid Vehicle which uses an onboard hydrogen fuel cell to either propel the vehicle or recharge a battery pack. The battery pack can be charged using a home electrical outlet. The FC PHEV uses significant battery energy before relying on the fuel cell to extend the range of the vehicle.

While each of the 16 EcoCARdesigns is unique, there are common attributes including:

  • All of the vehicles have plug-in capability, which can significantly reduce on-road petroleum consumption.
  • All of the designs use state-of-the-art lithium ion battery technology, so the vehicles are able to store more electric energy in smaller, lighter packages.
  • All of the vehicles use a renewable energy source that displaces petroleum consumption, which significantly reduces the amount of greenhouse gases emitted from the vehicle’s tailpipes.
  • All of the EcoCARteam architectures must retain the safety and real-world performance characteristics of production vehicles that consumers demand.

By broadening the technical focus of the competition to include more aspects of the entire vehicle development process, the university teams had a greater opportunity to expand their learning and refine their vehicle solutions. Ohio State University placed first in Year One of the competition and the University of Victoria and Mississippi State took home second and third place honors. All teams successfully completed the first year of EcoCAR and earned a vehicle key and the opportunity to compete in the second phase of the program.

Years Two and Three
During the second and third years of the competition, students build the physical vehicle and continue to refine, test, and improve vehicle operation. After receiving their physical vehicle, each team begins building the core components of their cars, as parts come in. A few months prior to the Year Two Finals, teams face critical Safety & Inspection Testing, which takes place on their respective campus. After passing early inspections, the re-engineered student vehicle prototypes will compete in a week-long Finals competition of engineering tests. These tests are similar to the tests GM conducts to determine a prototype’s readiness for production and the Year Two testing will take place at GM’s Desert Proving Grounds in Yuma, Arizona, a facility used for commercial vehicles. The Greenhouse gas, Regulated Emissions, and Energy in Transportation (GREET) model, developed at Argonne National Laboratory, will be used to assess a well-to-wheel analysis of the greenhouse gas impacts of the technology each team selects.

During the week-long competition, student teams will demonstrate the vehicles so when compared to stock production vehicles they meet or exceed the following goals:

  • Incorporate technologies that reduce petroleum energy consumption on the basis of a total fuel cycle well-to-wheel (WTW) analysis;
  • Increase vehicle energy efficiency;
  • Reduce criteria and WTW greenhouse gas (GHG) emissions; and
  • Maintain consumer acceptability in the areas of performance, utility and safety.

After the successful completion of Year Two, students will spend Year Three refining and improving their vehicles and will face a similar cycle of tests and competitions throughout the year. In Spring 2011, the Year Three winning team and overall EcoCAR competition winner will be announced.

Sponsors

The U.S. Department of Energy and General Motors are the headline sponsors for the EcoCAR competition. General Motors will provide production vehicles, vehicle components, seed money, technical mentoring and operational support. The U.S. Department of Energy and its research and development facility, Argonne National Laboratory, will provide competition management, team evaluation and technical and logistical support.

In addition, more than 30 industry sponsors provide participating teams with leading-edge math simulation software, automotive propulsion systems, programs and mentoring support to the students. EcoCAR sponsors include:

  • Government of Canada
  • California Air Resources Board
  • A123Systems
  • dSPACE
  • National Instruments
  • The MathWorks
  • Freescale Semiconductor
  • AVL Powertrain Engineering, Inc.
  • Clean Cities
  • National Science Foundation
  • Woodward
  • Vector CANtech, Inc.
  • Robert Bosch, LLC
  • Sensors, Inc.
  • Snap-On Tools
  • Magna International/Magna Powertrain
  • Renewable Fuels Association
  • Protec Fuel
  • Siemens PLM Software
  • Electric Power Research Institute
  • Delphi Foundation
  • EcoMotors
  • Women in the Winner’s Circle Foundation
  • igus
  • CarSim
  • XM Radio
  • OnStar

By sponsoring advanced vehicle engineering competitions like EcoCAR, GM, the Department of Energy and other industry sponsors are helping to develop the next generation of scientists and engineers. EcoCARfollows the previous successful student engineering competition, “Challenge X: Crossover to Sustainable Mobility,” also sponsored by GM and the U.S. Department of Energy.

Contacts

Kimberly DeClark
EcoCAR Communications and Logistics Manager
Argonne National Laboratory
Mobile (202) 441-0096
kdeclark@anl.gov

Sponsorship    

Kristen De La Rosa
Acting Section Leader of Advanced Vehicle Technology Competitions
Director of AVTC Center for Transportation Research
Argonne National Laboratory
Phone (512) 323-0587
Fax (512) 481-9043
Mobile (512) 845-4319
kdelarosa@anl.gov

The content & opinions in this article are the author’s and do not necessarily represent the views of AltEnergyMag

Comments (0)

This post does not have any comments. Be the first to leave a comment below.


Post A Comment

You must be logged in before you can post a comment. Login now.

Featured Product

U.S. BATTERY RENEWABLE ENERGY SERIES DEEP CYCLE BATTERIES

U.S. BATTERY RENEWABLE ENERGY SERIES DEEP CYCLE BATTERIES

Our RE Series batteries are designed to provide the highest peak capacity, longest cycle life, and greatest reliability for use in industrial or residential renewable energy applications. Renewable Energy Series batteries utilize the company's exclusive XC2™ formulation and Diamond Plate Technology® to create the industry's most efficient battery plates, delivering greater watt-hours per liter and watt-hours per kilogram than any other flooded lead-acid battery in the market. Our Deep Cycle batteries are engineered to work with solar panels as well as other renewable energy applications.